|
|
|
|
Drain/Pipe Stoppers
|
Used for sealing or isolating all types of pipelines. It can be used for low pressure testing with the correct fittings. Available in a wide range of sizes to suit most applications.
- 100mm
- 150mm
- 200mm
- 225mm
- 300mm
- 375mm
- 450mm
- 525mm
- 600mm
- 750mm
- 900mm
- 1000mm
Air Test Kit available
Caution for low pressure use only
|
 |
|
|
|
|
|
Elephant Trunking (Concrete chutes)
|
Elephant trunking has been designed to deliver concrete to lower level work areas via a flexible tube which can be easily manipulated. The hopper is used to provide the correct size of opening for concrete placement and should be used along with the required number of lengths of trunking.
- Assembled in 600mm lengths
- Diameter of chute 150mm/225mm
- Top opening of trunk hopper 900mm x 700mm
The use of mould oil is recommended.
|
|
|
|
|
|
Manhole Shuttering
|
Provided in 900mm & 1800mm heights and up to a diameter of 2700mm. Supplied in sections and are designed so that each set for manhole rings over 1200mm diameter will adjust to fit several smaller sizes (see table below).
Nominal Internal
Diameter of Manhole |
| mm |
Type A |
Type B |
Type C |
| 675 |
2 |
1 |
- |
| 900 |
2 |
2 |
- |
| 1050 |
3 |
- |
1 |
| 1200 |
3 |
1 |
- |
| 1350 |
3 |
2 |
- |
| 1500 |
4 |
- |
1 |
| 1800 |
4 |
2 |
- |
| 2100 |
5 |
1 |
1 |
| 2400 |
6 |
- |
- |
| 2700 |
6 |
2 |
- |
Internal type also available
SALE ONLY
|
|
|
|
|
|
Backhoe Trench Box
|
Strut widths available 600mm - 800mm, 800mm - 1200 and 1300mm - 2000mm.
- Base Unit 3m x 1.45m
- Top Unit 3m x 1m
- 20kN capacity, can be used for depths up to 5m
|
|
|
|
|
|
Trench Struts - Galvanised only
|
To ensure maximum grip on timber wailings the end plate corners are bent over. Suggested working loads for all size struts either open or closed is 3 tonnes with a safety factor of 3. All our struts are galvanised for longevity and reduced maintenance.
- No. 0 300mm - 450mm
- No. 1 450mm - 680mm
- No. 2 680mm - 1060mm
- No. 3 1060mm - 1670mm
|
|
|
|
|
|
Strongboys
|
Strongboy is a simple to use attachment for the standard prop that makes fitting RSJs and lintels, supporting brickwork or repairing walls, a lot easier. The strongboy effectively turns a two man job into a one man job.
|
|
|
|
|
|
Backhoe Manhole Box
|
Simplified struts designed for easy assembly and will allow quick construction of manhole excavations in depths up to 4 metres depending on soil.
- To suit the following ring sizes, 1050mm - 1350mm and 1330mm - 1800mm
- Can be used for excavations up to a depth of 4m
- Base Unit 2500x 2500 x 2000mm
- Base Unit 3000 x 3000 x 2000mm
- Top Unit 2500 x 2500 x 1000mm
- Top Unit 3000 x 3000 x 1000mm
Recommended for above
- 6.7 tonne 4 leg Chain Sling
|
|
|
|
|
|
Trench Sheets
|
Primarily used for ground support and trench work. Trench sheets are available in a wide range of lengths. Providing a safe working environment for groundworkers and utilities.
- Trench sheets (per metre)
a
mm
|
effective width
per sheet |
h
mm
|
t
mm
|
kg per linear
m
|
kg per sq. m |
section module
per sheet |
bending moment
KNm/m |
350 |
330 |
35 |
3.4 |
10.86 |
32.19 |
15.93 |
7.75 |
|
|
|
|
|
|
Manhole Cover Lifter
|
The hydraulic cover lifter allows one man to lift a heavy duty cover with ease and is supplied with a range of keys to suit different types of cover.
|
|
|
|
|
|
Cable Detection Equipment
|
Primarily used to detect buried electrical cables or any pipes with electrical tracers.
|
|
|
|
|
|
Trench Sheet Driver
|
This is to be used in conjunction with a trench sheet driving cap, for use with a standard air tool for driving trench sheets.
|
|
|
|
|
|
Trench Sheet Driving Cap
|
This cap is manufactured to fit the contours of the trench sheet.
|
|
|
|
|
|
Trench Sheet Extractor
|
The trench sheet extractor allows trench sheets to be safely extracted from the ground.
|
|
|
|
|
|
Rigid & Flexible Roadforms
|
Rigid forms are a simple form of shuttering, normally used for concrete slabs or floors. Each unit can be supplied in various heights to suit the thickness of slab. To obtain the correct length the forms can be connected using the built in joiners provided. Where required, flexible forms allow the creation of curves. To assist positioning, any number of forms may be joined in the same way as the rigid units.
- 3m long, widths: 100mm, 150mm & 200mm
|
|
|
|
|
|
Roadform Pins
|
- Mild steel pins - 24" length
|
|
|
|
|
|
Railway Sleepers
|
- 2590mm x 254mm x 127mm
- Hardwood grade 1
|
|
|
|
|
|
Screed Chairs
|
The base is placed on the ground and the screed rail dropped into the stirrup. Used for levelling floors, paths, screed rails, roads etc. To achieve the required levels the rails can be lifted or lowered.
|
|
|
|
|
|
|
Acrow Props - Galvanised only
|
Used to support load bearing structures in the building and construction industry. Suitable for all kinds of building and repair works.
- No. 0 1070mm - 1820mm
- No. 1 1750mm - 3120mm
- No. 2 2007mm - 3350mm
- No. 3 2590mm - 3950mm
- No. 4 3200mm - 4870mm
All our props are galvanised for longevity which reduces the need for maintenance.
|
|
|
|
|
|
Test Cube Moulds
|
- 100mm mould with detachable base
- 150mm with detachable base
- Compacting bar for Test Cube Mould
The use of mould oil is recommended with all concrete associated products.
|
|
|
|
|
|
Slump Cones & Tamping Rod
|
- Cone 300mm high x 200mm to 100mm dia
- Tamping Rod 600mm x 16mm dia, rounded both ends
|
|
|
|
|
|
Frost Blankets
|
Made from closed cell expanded polythene foam the Frost Blanket will help protect your winter poured concrete. The blankets are reusable and hardwearing.
|
|
|
|
|
|
|
|
|
|
Concrete Groove Filler Barrow
|
The mobile Concrete Groove Filler Barrow can transport up to 200/250 litres of concrete from a swinging conical chute to fill joints between pre-cast panels. Only requires one person to oeprate.
Complete alignment is achieved by a third wheel. A hand-controlled gate flap allows the concrete mix to be percisely positioned.
- 200 litres continual discharge
- 250 litres side discharge
|
 |
|
|
|
|
 |
|
|
